Universal Testing Machines
About Us Product contact Enquiry Site Map Product Gallery
  Dynamic Balancing Machine Model


Dynamic Balancing Machine
Dynamic Balancing Machine HDCM
Dynamic Balancing Machine
Dynamic Balancing Machine
Get A Quote
Get A Quote
Dynamic Balancing Machine HDCM
Dynamic Balancing Machine
Get A Quote
Machines model HDCM are belt driven horizontal type photo scanning Universal Hard Bearing Balancing Machine, provided with microprocessor based measuring panel HDCM – 8500 suitable for balancing different shapes of rotors, of electrical machines, cylinders, fly wheel, rotor of centrifugal pumps and any other type of rotating machines.
These machines are very simple in design. No. drive coupling/ adaptor etc. required to connect to the rotor to be balanced. It has following advantages
  • Coast saving on manufacturing of precision adaptor to connect drive coupling to rotor.
• Any rotor can be balanced without loosing time in manufacturing of adaptor.
• The balancing accuracy of rotor not disturbed due to unbalance in drive coupling / adaptor
• Belt drive machine are more accurate (about 5 times) as compared to end drive machine.
The machines features a very simple operation. The working cycle is fully automatic. From safety point of view a double press push button starts machine, Measures and stores the unbalance values on DPMs for two Plane simultaneously and stops machine. Key board facility provided in measuring panel for correct data deeding of rotor with l digit accuracy for its dimensions like A.B. C, R1 & R2. Tolerance limits of both correction planes i.e.t 11 & t12 can be feed so that when rotor is balanced within the limits respective LEDs glow up, indicating no further correction necessary. For other details please refer “ features of measuring panel HDCM-8500"
Digital display for unbalance indication
  Amount and angle of unbalance for both planes displayed on separate DPMs. Hence linear accuracy is very goos as compared to analog meter + /- 1 digit for amount and +/-1 degree for angle.
Digital display for RPM indication
  A DPM is provided to indicate balancing speed continuously as a standard feature.
Auto Stop
  No necessity to stop machine once started. It stops automatically after stabilization of unbalance results.
Simultaneous Indication
Amount and angle of unbalance in both planes displayed simultaneously and remains displayed (stored ) till next run. This totally eliminates operation of plane selector and reduces additional time for stabilization of readings in other plane.
Data of rotor dimensions and balancing tolerance i.e. values of A,B,C,R1,R2, t11,t12 are fed by key operation. Hence accuracy of data feeding is accurate up to 1 digit.
Tolerance Indicators
Separate LEDs are provided for both planes which glow when unbalance is reduced within balancing tolerance.
Auto Range
Depending upon whether unbalance amount is more or less a respective course or fine range gets automatically selected till rotor gets balanced within tolerance limits, Multiplier operation is totally eliminated
Data store
Data of various rotors can be stored against respective rotor type nos. Hence no need of measuring of rotor dimensions or rotor data feeding when repeat balancing operation required. Just call rotor type no. and machine is ready for balancing.
Self Check
Panel is provided with ‘self-check’ mode which checks proper functioning of digital displays, LEDs is cyclic operation. This helps immediate fault detection.
  Printer :
  A matrix printer can be connected through ‘FIE’ software. It shows runs till rotor is balanced within balancing tolerance.
  Component Indication :
‘FIE’ software specially developed with 3-99 component indication is suitable for balancing of rotor with fixed locations for balancing correction.
  Unbalance Correction :
Drill attachment 8mm capacity portable drill With supporting overhead railing.
Separate drilling attachment 19mm. Capacity with a vertical drilling head, manual.
Portable type reverting hammer (piston type) speed 1800 blows/minute, capacity 6mm in a aluminum suspected from top with rail.
Tangential belt drive, in addition to standard ( suitable for a particular type of rotor for production balancing )
Longitudinal movement of right hand pedestal by chain & sprocket attachment.
Wt. of rotors kg 0.2-10 0.3-30 0.5-50 1-100 3-300
Max. wt. on each pedestal kg 7.5 22.5 30 75 180
Max. diameter of rotor mm 250 5000 500 800 1000
Max. distance between bearings mm 300 1200 1200 1200 2100
Min. distance between bearings ( drive outside pedestal ) mm 20 50 50 50 150
Shaft diameter mm 5-50 5-50 5-50 15-80 20-120
* Balancing speed range ( n ) RPM 750-3000 500-2000 500-2000 400-1600 300-1500
Power of drive motor HP 0.33 0.75 0.75 1.5 3
Acceleration capability ( ga2n2 ) kgm2n2 0.29x106 0.37x106 0.37x106 0.88x106 3.9x106
Min. Unbalance mass measured g 0.01 0.1 0.1 0.1 0.1
Max. Unbalance mass measured kg 0.4 4 4 4 4
Unbalanced reduction ratio % 95 95 95 95 95
Min. Achievable unbalance per roto wt. ( For mx.roto wt. ) gmm / kg or micron. 0.2 0.2 0.2 0.2 0.2
Electro Mechanical Universal Testing Machines Unitek 9400 Electro Mechanical Universal Testing Machines Unitek 9700 Electro-Mechanical PC Control Universal Testing Machine Compression Testing Machines Erichsen Testing Machines Laminated Spring Testing Machines Torsion Testing Machines Impact Testing Machines Rockwell Hardness Testing Machines Vickers Hardness Tester VM 50 Computerised Vickers Hardness Tester [Model : VM 50 PC] Computerised Brinell Image Analysis System [B.I.A.S] Computerised Fully Automatic Brinell Hardness Tester Model : B 3000-PC-FA Portable Brinell Hardness Tester SAROJ make Rockwell Hardness Testing Machine Brinell Hardness Tester Model B 3000 [O] Brinell Hardness Tester Model B 3000 [H] Dynamic Balancing Machine Model HDM Dynamic Balancing Machine model HDCM Dynamic Balancing Machine Model HDVM & HDVTM
Designed by : MID   Hosted by : GID   Promoted by : PBD
Sitemap Contact Home